createaccountlogin

Signature Flow Meter

signature 01

 

            The Signature® flow meter is designed for open channel flow monitoring applications. It supports flow measurement technologies including ultrasonic, bubbler, submerged ultrasonic area velocity, and non-contacting laser Doppler area velocity. The meter can calculate flow using standard open channel level-to-flow conversions, as well as user defined equations or level to flow data points, depending on the application need.

            With multiple smart interface options and multi-parameter logging (such as pH), the Signature flow meter provides a common platform for control action, reporting, and communication.

Standard Features

  • -          Multiple parameter data logging
  • -          Program and Summary Reports
  • -          Data Integrity Verification
  • -          Triggering, sampler enabling
  • -          Compatibility with Flowlink® software

Applications

-          Industrial Pretreatment Compliance

-          Shallow flow measurement in large and small pipes

-          Permit Enforcement

-          Wastewater Treatment Plants

-          Outfall

Options and Accessories

  • TIENet™ 301 pH/Temperature Device 
  • TIENet™ 306 Sampler interface (triggering and pacing) 
  • TIENet™ 308 Analog Output Card (two outputs per card, maximum of three cards for six user-assignable outputs) 
  • TIENet™ 310 Ultrasonic Level Sensor 
  • TIENet™ 330 Bubbler module 
  • TIENet™ 350 Area Velocity Sensor 
  • TIENet™ 360 LaserFlow™ Non-contacting Area Velocity Sensor 
  • Battery back-up power 
  • Mechanical totalizer 
  • Advanced communication options 
  • Mounting hardware

 

 

Signature® Flow Meter

Size (HxWxD):

8.88 x 12.22 x 8.22 in. (with mounting bracket)

Materials of construction:

PPO Polyphenylene Oxide

Enclosure (self-certified):

NEMA 4X/IP66

Power Required:

12V DC, 100 to 240 VAC, 50/60 Hz; 12V DC, lead acid battery; 12V DC (current consumption varies depending upon configuration)

Cable Entry:

Standard ¾" NPT conduit, Optional ¾" NPT cord grips

Flow Measurement Technologies:

Ultrasonic (TIENet™ 310), Bubbler (TIENet™ 330) specified at time of order

Inputs:

Two SDI-12, Two MODBUS ASCII/RTU

Setup:

Front Panel Keypad, Flowlink® software - with serial USB (standard), or optional remote cellular or Ethernet

Flow Conversions:

Weir, Flume, British Flume, Metering Insert, Manning Formula, Equation, Level to Flow Data Points

Data Storage:

Non-volatile flash; retains stored data during program updates. Capacity-8 MB (180 days with 5 parameters logged at 1 minute intervals). User Selectable Storage Intervals of 15 or 30 seconds; 1, 2, 5, 15, or 30 minutes; or 1, 2, 4, 12, or 24 hours plus user defined reporting intervals.

Data Retrieval:

USB drive, Flowlink® software - with serial USB, remote cellular, or Ethernet

Outputs:

MODBUS ASCII/RTU

Sampler Interface:

TIENet™ 306 (Optional)

Communication Options:

CDMA or GSM cellular, Ethernet

Temperature Range-Operating and Storage:

-20 to 60°C (-4 to 140°F)

Copyright @  Siam Pollutek Co.,Ltd. All Right Reseveds.